Aileron Pushrods & Bellcrank…

I finally got around to making the pushrods and getting the bellcrank installed.  It’s kinda fun making the pushrods… I used a little self centering vice from Harbor Freight on the drill press and it worked out quite well.  The pushrods are really pretty self-explanatory.  Just measure everything out, leave about 1/32″ more just to accomodate for the blade thickness and to leave enough to clean up the ends. 

 
Main Pushrods, cut to length, prime, install threaded end, and rivet.

 
And here is the small pushrod that goes from the bellcrank to the aileron attach bracket.